NH3 Jobs

Maintenance Controls Technician with PLC

O
Ohio Pet Foods, Inc.Salem, OR1w ago
Full timefulltimeTechnician

Compensation

Estimated
Est. $29–$37/hr
Certifications
Estimated
PLC Certification
Equipment
Estimated
Allen-Bradley PLCsHMI SystemsSCADA
Functions
ElectricalMaintenanceControlsSafety

The Role

Position Summary

The Controls Technician keeps BrightPet Salem production equipment reliable by diagnosing and correcting automation, instrumentation, and control-system problems. The role combines disciplined troubleshooting with controlled change management. The technician is expected to protect people and product, restore equipment to an approved condition, document what was found and changed, and prevent repeat failures. Electrical installation and repair work that requires an Oregon electrical license must be assigned to an appropriately licensed person. This role requires the candidate to be a license electrian.

Candidate Profile

The strongest candidate can move from symptoms to evidence without guessing. They understand how PLC logic, field devices, networks, drives, machine safety, and the mechanical process interact. They make controlled changes, preserve recoverable backups, communicate clearly with operators and other technicians, and remain within electrical licensing and site authorization limits.

Essential ResponsibilitiesSafety Food Safety and Equipment Protection

· Follow BrightPet safety rules, site good manufacturing practices, sanitation controls, task-specific personal protective equipment requirements, and machine-specific lockout/tagout procedures.

· Place equipment in a verified safe state before work. Confirm zero-energy conditions using the approved method and restore all guards, covers, interlocks, enclosure protection, and safety devices before release.

· Stop and escalate work that is unsafe, unclear, beyond personal qualification, missing an approved specification, or likely to create a food safety, quality, environmental, or equipment risk.

· Do not bypass machine safeguards, defeat interlocks, use unguarded grinders, make unauthorized temporary repairs, or return equipment to service with an unresolved safety defect.

· Protect exposed product zones and components from tools, debris, lubricant, metal shavings, chemicals, moisture, and other contamination. Coordinate cleaning and inspection before handback when the work could affect food safety or sanitation.

Work Requests Work Orders and COGZ

· Use COGZ as the maintenance system of record for assigned preventive, corrective, emergency, and improvement work. Begin work from an approved assignment unless the emergency process applies.

· For an emergency request from Operations, an authorized on-shift technician may convert the request, perform the repair, and close the resulting work order under the approved emergency workflow.

· For a nonemergency defect found by a technician, create a technician work request with the location, asset, symptoms, risk, and supporting details. The Maintenance Lead or Supervisor reviews, plans, prioritizes, and schedules the resulting work order.

· Do not self-assign planned work or close unfinished work. Keep incomplete work open with a clear status, the reason it remains incomplete, the condition of the equipment, and the next action required.

· Complete every work record with clear Found, Cause, and Action notes; actual labor; parts and quantities; downtime when applicable; failure and cause codes; relevant measurements, settings, and test results; and any follow-up work needed.

· Treat any optional Paperless Done entry as a supporting update only. Final completion and closure must be recorded in COGZ.

Controls and Automation

· Diagnose faults involving programmable logic controllers, human-machine interfaces, variable-frequency drives, motor-control interfaces, remote input/output, sensors, encoders, relays, solenoids, and process instrumentation used by the site.

· Use controller status, alarms, trends, I/O state, schematics, network diagnostics, and direct equipment observation to isolate the cause before changing a program, device, parameter, or component.

· Support PLC and HMI programming, configuration, and troubleshooting on the platforms used at the Salem site. Make changes only through the approved authorization and change-control process.

· Troubleshoot industrial Ethernet and fieldbus communications, managed switches, addressing, remote I/O, and device communication issues within training and authorization.

· Maintain and test sensors and instruments for position, speed, temperature, pressure, level, flow, weight, and other process variables. Confirm calibration or functional accuracy when the task requires it.

· Configure and troubleshoot variable-frequency drives and other electronic motor controls. Record original and final parameters and coordinate power-side work with an appropriately licensed electrician.

Controlled Changes and Recovery

· Create or confirm a current backup before an approved logic, HMI, drive, network, or configuration change. Preserve the prior version so the change can be reviewed or reversed.

· Document the reason for each approved change, authorization, date, person making the change, equipment state, files or parameters affected

Benefits

Estimated
  • Competitive pay
  • Health insurance
  • 401(k) with match
  • Paid time off
  • Technical training budget