HVAC Technician
Compensation
The Role
Backed by Callaway Golf and Danny Meyer’s Enlightened Hospitality Investments, Five Iron blends world-class technology with hospitality-driven service across its sports bars, restaurants, and entertainment venues. With 35 locations open and more than 50 in the pipeline worldwide, the brand is expanding its reach while remaining rooted in innovation, inclusivity, and community connection.
The HVAC Technician services, maintains, and repairs the mechanical systems that keep Five Iron Golf's New York venues comfortable and operational. This is a hands-on, detail-oriented role, with the majority of time spent in the field servicing, maintaining, and repairing equipment. The technician is expected to independently troubleshoot and repair commercial HVAC equipment, run seasonal start-up and changeover, and perform preventive maintenance on kitchen, bar, and building equipment. Based in New York City, the technician travels throughout the region to support multiple venues and also assists with HVAC design review, scoping, and bidding for future build-outs. Design and bidding support is a secondary part of the role. Simulator bays carry a heavy heat load from projectors, computers, and guest density, so reliable cooling is critical to the guest experience and to protecting technology assets.
Based in New York, NY, this full-time position requires regular travel to venues throughout the region, with occasional overnight travel.
Approximate Time Allocation
- Approximately 75–80%: hands-on service, preventive maintenance, seasonal start-up/changeover, repairs, and appliance PM across venues.
- Approximately 10–15%: regional travel between venues and site coordination.
- Approximately 10%: build-out support, design review, and bidding.
Seasonal Start-Up (Cooling) and Shutdown / Changeover (Heating)
- Spring start-up: inspect and clean condenser coils; verify fan motors, contractors, capacitors, and crankcase heaters; check refrigerant charge (pressures, superheat, subcooling); and test cooling operation under load.
- Air handler start-up: inspect blower assemblies, belts, sheaves, and bearings; clean evaporator coils and condensate pans; clear and test condensate drain lines and float safety switches; replace filters.
- Fall changeover: transition systems to heating mode; inspect and test gas furnaces, heat pumps, electric heat strips, and hydronic heat (burners, ignition, flue/venting, heat exchangers, safeties, and reversing valves as applicable).
- Verify thermostat/controller programming, setpoints, schedules, damper and economizer operation, and sensor calibration at each changeover.
- Complete and document a start-up/changeover checklist for each unit, including readings taken and deficiencies found.
HVAC Preventive Maintenance
- Perform scheduled PM on condensing units, rooftop units (RTUs), split systems, ductless/mini-split and VRF systems, air handlers, fan coils, and exhaust/make-up air fans.
- Take and record electrical and refrigeration readings: voltage, amp draw, suction/discharge pressures, superheat/subcooling, and temperature split.
- Replace or clean filters on a defined schedule; inspect ductwork, insulation, dampers, and diffusers for leaks or damage.
- Tighten electrical connections, inspect wiring and disconnects, and lubricate motors and bearings per manufacturer specifications.
- Inspect and clean condensate systems to prevent water damage and microbial growth.
Service, Diagnostics, and Repair
- Diagnose electrical, mechanical, refrigerant-circuit, and control failures using multimeter, clamp meter, manifold gauges, micron gauge, leak detector, and thermometers.
- Repair or replace components including capacitors, contactors, relays, transformers, fan and blower motors, belts, bearings, TXVs, pressure switches, condensate pumps, thermostats, and control boards.
- Perform refrigerant leak detection and repair, evacuation, recovery, and recharge in accordance with EPA Section 608 requirements; maintain refrigerant usage logs.
- Perform brazing and basic sheet metal, piping, and ductwork repairs.
- Respond to service calls promptly and prioritize by guest and business impact (bays, bar, kitchen, event spaces).
- Document root cause, parts used, and labor for every repair; recommend repair-vs-replace with supporting data (equipment age, repair history, cost).
- Escalate major repairs, compressor or coil replacement, and capital replacement needs to management, and coordinate third-party vendors, including scope review and work verification.
Appliance and Facility Preventive Maintenance
- Ice machines: scheduled cleaning and descaling, water filter replacement, condenser cleaning, and inspection of water and drain lines.
- Walk-in and reach-in refrigeration/freezers: clean condensers and evaporators; inspect door gaskets and heaters; check defrost cycles and fan motors; verify and log temperature performance.
- Bar equipment: assist with draft system and glycol chille
Benefits
Estimated- Competitive pay
- Health insurance
- 401(k)
- Company vehicle
- Tool allowance
- Paid time off
